InWater Technologies provides spare parts and support for the PR Aqua drum filters, which are no longer manufactured. We stock some standard parts including screens, wheels and seals for the drum inlet, but can source most other parts as needed.
Screens
The screens for PRA drum fitlers are 18″ x 24″ (slightly smaller for 32 series) and come with the gasket glued. Available in the following sizes (microns): 11µ, 17µ, 21µ, 30µ, 40µ, 54µ, 80µ, 150µ, 200µ. If you’re not sure what size screens you have, you can check the imprint in the corner. The number of screens required depends on the model number (table below). Please specify if you have a 32 series filter.
| Drum Filter Model | Number of Screens |
|---|---|
| RFF, RFS, RFM 48048 | 16 scrs |
| RFF, RFS, RFM 48072 | 24 scrs |
| RFF, RFS 60072 | 30 scrs |
| RFF, RFS 60096 | 40 scrs |
| RFF, RFS 60120 | 50 scrs |
| RFF, RFS, RFM 48096 | 60 scrs |
| RFF, RFS, RFM 32018 | 4 scrs |
| RFF, RFS, RFM 32036 | 8 scrs |
| RFF, RFS, RFM 32054 | 12 scrs |
RFM 20014 requires 3 screens but must be bent onsite (see resources below).
Screen repair plugs
Available in packs of 10 (PN: 10684).
Screen gasket
Replacement gasket for screens. 7ft required per screen (PN: 10684)
Drum support wheels
All series require two wheels except for the 60096 and 60120 series which require four wheels.
Drum inlet seal
Available for 32 series, 48 series and 60 series.
Spray nozzle assembly
The full spray nozzle assembly comes in 1″ for the 60066 and 60120 series and 3/4″ for all other series. The stainless steel spray nozzle tip and spray nozzle casket can be purchased separately.
Resources
- PRA Rotofilter Drum Installation and Operation Manual
- Screen Cleaning Instructions
- Bending 20014 screens
